Infection Prevention Orientation ManualBaerbel Merrill, MS, BSN, CIC Show
Download a printable PDF Version of this section. ObjectivesAt the completion of this section the Infection Preventionist (IP) will:
Number of hours
Required Readings
Suggested Readings
OverviewStandard and transmission-based precautions are the cornerstone for all infection prevention activities to prevent healthcare-associated infections (HAI) and the transmission of communicable diseases to patients, staff and visitors. The materials in this chapter should be the foundation for all infection prevention and control activities. This information can be used to develop and review the policies and procedures implemented in a facility. The IP should also use this information to provide education to staff. Additionally, the IP will use this information for compliance review. Key ConceptsThe following information will include the principles of transmission of microorganisms and practices used to prevent the transmission of infection among patients and staff of and visitors to the healthcare facility. Chain of InfectionA break in the chain of infection can prevent the transmission of infection. Figure 1 provides a picture representation of the individual components of in the chain of infection.
Figure 1. Chain of Infection. Adapted from RNCentral.com. Infectious Agent:An infectious agent is any disease-causing microorganism such as a bacterium, virus, parasite, or fungus. Characteristics of an disease-causing organism include the organism’s virulence (ability to multiply and grow), invasiveness (ability to enter tissue), and pathogenicity (ability to cause disease). Reservoir:A reservoir is the location or physical place that harbors microorganisms (pathogenic, opportunistic or non-pathogenic) and serves a possible source of infection. Reservoirs of disease can be inanimate such as toilet seats, elevator buttons, or animate such as food, water or human bodily fluids. Portal of Exit:The portal of exit is the physical location from which an organism leaves an animate reservoir, such as the respiratory tract (nose, mouth), intestinal tract (rectum), urinary tract, or blood and other body fluids. Mode of Transmission:The mode of transmission is the means by which an organism transfers from one carrier to another by either direct transmission (direct contact between infectious host and susceptible host) or indirect transmission (which involves an intermediate carrier like an environmental surface or a piece of equipment). Portal of Entry:The portal of entry is the physical location through which a pathogen enters the host’s body such as mucus membranes, open wounds, or tubes inserted in body cavities like urinary catheters, central lines or feeding tubes. Susceptible Host:A susceptible host is a person who is at risk for developing an infection. Several factors make a person more susceptible to disease including age (young people and elderly people generally are more at risk), underlying chronic diseases such as diabetes or asthma, conditions that weaken the immune system like HIV, certain types of medications, invasive devices like feeding tubes or central lines, and malnutrition. Sources/Reservoirs of InfectionThe source and/or associated reservoirs of infectious agents are categorized into three distinct types: human, animal and environmental. It’s important for an IP to be aware of what the typical sources and reservoirs are of the common pathogens found in healthcare facilities in order to better control and prevent the spread of disease. Routes of TransmissionThe transmission of an infectious organism to a susceptible host occurs through three modes: direct or indirect contact (contact), droplets distributed in the air (droplet), and via the inhalation of air particles (airborne) which are generally smaller than droplets. The routes through which an infection can be spread is also important to both the IP and the HCP because each route will dictate the necessary personal protective equipment and precautions required to stop or inhibit that spread. Control MeasuresControl of the transmission of infectious diseases is organized into three levels: 1) Engineering, 2) Administrative, and 3) Personal Protective Equipment. Organizational, Administrative and Healthcare worker ResponsibilitiesWhen it comes to controlling and preventing the spread of infectious diseases within a healthcare facility, there are three levels of responsibility. This is similar to, and is in accordance with, the hierarchy of control measures. The first level of responsibility associated with control of disease transmission falls on the organization itself. The second level involves the facility’s or institution’s administration, and the third level relates to that of the healthcare worker. In general, healthcare worker responsibilities for controlling and preventing the spread of disease occur through three activities (separately or in combination): 1) performing a point of care risk assessment (PCRA), 2) compliance with standard precautions, and 3) compliance with transmission-based precautions. Standard PrecautionsStandard precautions are a group of infection prevention practices which include hand hygiene and the use of gloves, gowns, masks, eye protection or face shields depending on the anticipated exposure. The basic premise of standard precautions is to treat all patients’/residents’ blood or body fluid as if they are infectious. It is important to train all staff and monitor their compliance of these precautions. It’s recommended the IP aggregate reports of compliance to standard precautions policies and present the results to the facility’s Infection Prevention Committee. The key components of both standard and transmission-based precautions include:
Point of Care Risk AssessmentPrior to every patient/resident interaction, all healthcare providers (HCPs) have the responsibility to assess the infectious risk posed to themselves, other HCPs, patients, or visitors. The ability to perform a thorough point of care risk assessment of the patient or resident and their environment is fundamental to practicing infection control. The IP needs to have a very complete understanding of how to do a risk assessment, how to include it in every patient/resident interaction, and how to use the findings to implement appropriate infection control practices (i.e., institution of standard and/or transmission-based precautions). The IP is required to educate healthcare providers about the point of care risk assessment and reinforce its use frequently. By applying the appropriate control measures as determined through the assessment, the healthcare provider can reduce the risk of infection to themselves, other healthcare staff, the patient/resident, and visitors. Source ControlSource control involves measures to separate those patients/residents with symptoms of various transmissible organisms from those without. These measures can include spatial separation whether in separate waiting rooms or the separation of patients by 2 meters for respiratory illnesses involving the production of aerosolized droplets (e.g., coughing). Other source control measures involve erecting partitions to protect staff, following facility specific protocol to place patients/residents with certain symptoms or known organisms directly into a single room. Options include placing patients with severe respiratory illnesses in negative pressure rooms if available. In certain settings, appointments can be made for these patients at the end of the day, or postponed until the acute phase of the illness has subsided. An IP should understand what supplies are necessary for source control in the facility. Such supplies include, but are not limited to: PPE, partitions, masks, etc. It is the institution’s responsibility to supply staff with the appropriate PPE. Hand HygieneHand hygiene (HH) has been identified as the most effective way of preventing the transmission of healthcare-associated infection to patients, staff and visitors in all healthcare settings. Because HH represents a new term in the healthcare vocabulary it is critical that all infection control professionals become familiar with the new terminology and the heightened emphasis placed on HH in healthcare settings. Despite the fact that HH is considered the most important and most effective infection prevention and control measure, compliance with HH protocols by healthcare providers continues to be low. The five elements of HH that are important for every healthcare provider to understand are listed and described below:
Of particular importance to the IP are the facilities policies with regards to who, what, when and where HH should be performed, and monitoring the compliance with such policies. It is often the responsibility of the IP to perform audits of HH compliance. Indications for Hand HygieneIn every healthcare setting there are certain times that HH can and should be used for the best infection prevention. These select times are also referred to as “before” and “after” moments, and relate to before and after a healthcare provider will come in contact with a patient, resident or their environment. Hand Hygiene TechniqueCorrect technique is a fundamental part of HH. There are many things to consider with regard to the correct performance of hand hygiene. These include the duration, hand characteristics (e.g., nail length), types of clothing and accessories worn, and areas of the hands that are often missed. Furthermore, there are two available methods for performing hand hygiene which have strengths and limitations. Hand Hygiene AgentsA multitude of agents are available for HH in any healthcare facility type. The agent used in a particular location may depend on facility policy, price, staff acceptance, type of care performed in the setting, etc. Hand Hygiene PolicyEvery healthcare facility should have a HH policy in place. There may be multiple policies in place that describe different aspects of HH, such as selecting the agents that will be used, or who is responsible for monitoring compliance. Additionally, there may be policies for each individual location within a healthcare facility. It is very important that the IP is familiar with all policies that relate to hand hygiene within their facility. Hand Hygiene MonitoringAs mentioned before, it is often the responsibility of the IP to monitor for compliance with hand hygiene policies and procedures. It is imperative for the IP to understand the audit process, why it’s important, and to whom, how and when the audit results are provided. Patient PlacementSingle rooms have been shown to lower healthcare-associated infections. When there are a limited number of single rooms available, it is prudent to prioritize them for those who have conditions that facilitate transmission of infectious material to other persons (e.g., draining wounds, stool incontinence, and uncontained secretions). Additionally, those patients/residents whom are at an increased risk of acquisition and adverse outcomes resulting from healthcare-associated infections (e.g., immuno-suppression, open wounds, indwelling catheters) should be placed in single/private rooms when possible. Patient FlowPatient flow refers to the transfer or transportation of patients/residents either within or outside of the facility, as well as individual patient/resident movement. It is necessary to use appropriate precautions when transporting patients/residents. Aseptic TechniquesMedical and laboratory procedures of any kind are performed under certain conditions and using one of two techniques: aseptic vs. clean. An awareness and understanding of each will help the IP to distinguish between the two techniques, know when aseptic technique is required and when clean technique is acceptable. Personal Protective EquipmentPersonal protective equipment (PPE) is any type of specialized clothing, barrier product, or respiratory device used to protect the individual from potentially infectious persons, bodily fluids and excretions or contaminated objects. PPE acts as a barrier between infectious materials and the skin, mouth, nose, or eyes (mucous membranes). The routine use of PPE is an institutional requirement in all healthcare facilities. It is important for the IP and healthcare providers to understand the specific technique in which PPE is put on (don) and taken off (doff). Please see appendices A and B for pictures and to learn how to don and doff PPE. The three categories of PPE are:
Sharp Safety and Prevention of Bloodborne PathogensAnother critical element to consider for both standard and transmission based-precautions is sharp safety and the prevention of bloodborne pathogens. Visitor ManagementVisitor management is the control of both access and actions of people visiting patients/residents for the safety, security and prevention of disease transmission. It is also an important topic for review and consideration in terms of the implementation of and compliance with precautions. Transmission-Based Precautions:Standard precautions, when applied correctly and consistently, will decrease the chance of transmitting of the majority of infections. However, there are other situations which will require targeted precautions to protect the patient, healthcare provider, visitor and the environment. These additional precautions are known as Transmission-Based Precautions and include:
Contact PrecautionsContact precautions prevent the spread of infectious agents by direct and indirect contact. Key components of contact precautions include HH, PPE, patient placement, equipment management, patient transport, and visitor management. Patient Placement for Contact PrecautionsAlthough a private room with a dedicated bathroom is preferred for patients/residents under contact precautions, it is not always possible. If a private room is not possible, there are certain interventions that must be followed to cohort patients/residents. Droplet PrecautionsDroplet precautions are used to interrupt the transmission of infectious agents that are spread by the droplet route. Similar to contact precautions, the key components to droplet precautions include: HH, PPE, patient placement, equipment, patient transportation, and visitor management. Patient Placement for Droplet PrecautionsAgain, a private room is recommended for patients/residents requiring droplet precautions. However, when this isn’t possible and cohorting patients/residents is necessary. Airborne PrecautionsAirborne precautions are used to prevent the transmission of infectious agents that are spread through the air. This is different than droplet in the size of the particle and length of time they remain in aerosolized form. Similar to contact and droplet precautions, the key components of airborne precautions include: HH, PPE, patient placement, equipment, patient transportation, and visitor management. Patient Placement for Airborne PrecautionsUnlike both contact and droplet precautions, a private room with negative pressure is necessary, but it is not always possible. Immunization Status of Healthcare Worker Staff:The PPE required to care for someone on airborne precautions depends on the staff member’s immunization status against the organism(s) involved (e.g., measles, varicella). However there are some airborne organisms against which a person cannot be immunized such as those that cause tuberculosis (TB) and severe acute respiratory syndrome (SARS). Other IssuesAerosol Generating Procedures (AGP)An aerosol generating procedure (AGP) is a medical or surgical procedure that may generate aerosols such as those performed during surgery, respiratory treatments, and suctioning. Examples of aerosol generating procedures include (but are not limited to):
It is prudent to avoid performing AGPs on a patient with known or suspected respiratory infection unless medically necessary. Until the infectious disease is resolved, either delay the procedure (if clinically appropriate) or make procedural changes to the care performed to reduce the risk of disease transmission. An example of a procedural change in this instance would be to use an aero chamber instead of a compressor to deliver aerosolized medications. Anytime a planned or emergent AGP must be performed on a patient/resident with a known or suspected respiratory illness, the use of a negative pressure room is recommended. Additionally, only those healthcare workers essential to performing the procedure should be in the room. In all circumstances, healthcare providers should wear a surgical mask and eye protection at a minimum. The use of an N95 mask or positive airway pressure Respirator (PAPR) is required when SARS, TB, or other emerging pathogens are suspected until the disease causing organism has been identified. Handling of Deceased BodiesInforming both healthcare providers and those who handle, transport and process deceased bodies of the necessary precautions is often a role IPs must take to prevent transmission of infectious and communicable diseases. The responsibility of notifying funeral home staff, morticians and/or coroners regarding an infectious disease or communicable illness of the deceased can also fall on the shoulders of an IP. It is important for an IP to be aware of their facility’s policies and local jurisdictions regulations or rules surrounding deceased bodies. Handling of Linen, Waste, Dishes and CutleryHealthcare facility staff members who handle linen, waste, dishes and cutlery are also at risk of acquiring infectious diseases and, as such, require some form of PPE. It is often the responsibility of the IP to review policies for the protection of these workers with regards to standard and transmission-based precautions and to institute a monitoring program to determine compliance. Documentation and ReportingThere is no standard recommendation for the documentation of infection prevention and control activities in relation to specific patients or to specific groups. However, there are three good reasons to document the appropriate use of, and compliance with, policies related to standard and transmission-based precautions. 1. To facilitate communicationThrough documentation, nurses communicate to other nurses and care providers their assessments about the status of clients, nursing interventions that are carried out, and the results of these interventions. Documentation of this information increases the likelihood that the client will receive consistent and informed care or service. Thorough, accurate documentation decreases the potential for miscommunication and errors. While documentation is most often done by nurses and care providers, there are situations where the client and family may document observations or care provided in order to communicate the information with members of the healthcare team. 2. To promote good nursing careDocumentation encourages nurses to assess client progress and determine which interventions are effective or ineffective, and identify and document changes to the plan of care as needed. Documentation can be a valuable source of data for making decisions about funding and resource management or to facilitate nursing research. These have the potential to improve the quality of nursing practice and client care. Individual nurses can use outcome information or critical incident to reflect on their practice and make needed changes based on evidence. 3. To meet professional and legal standardsDocumentation is a valuable method for demonstrating that, within the nurse-patient relationship, the nurse has applied nursing knowledge, skills and judgment according to professional standards. The nurse’s documentation may be used as evidence in legal proceedings such as lawsuits, coroners’ inquests, and disciplinary hearings through professional regulatory bodies. In a court of law, the client’s health record serves as the legal record of the care or service provided. Nursing care and the documentation of that care will be measured according to the standard of reasonable and prudent nurse with similar education and experience in a similar situation. ResourcesHelpful/Related Readings
Helpful Contacts (in WY or US)
Related Websites/Organizations
Appendices:Please see the printable PDF version of this section to view the following appendices: What must be worn when entering the room of a patient in droplet isolation quizlet?Each person who enters the room must wear respiratory protection in the form of an N95, p100, or other stronger masks.. The patient should be placed in an private room. ... . Masks must be worn when entering the room.. If transport or movement of the patient is essential the patient must wear a surgical mask.. Which of the following PPE items should the nurse remove first?The order for removing PPE is Gloves, Apron or Gown, Eye Protection, Surgical Mask. Perform hand hygiene immediately on removal.
Why must the nurse wear protective goggles when suctioning?Eye protection provides a barrier to infectious materials entering the eye and is often used in conjunction with other personal protective equipment (PPE) such as gloves, gowns, masks or respirators.
Which new admission should the nurse plan to place in a private room with negative pressure airflow quizlet?Which of the following rooms should the nurse assign to the client? A client who has or might have tuberculosis requires airborne precautions. That means a private room with negative-pressure airflow. Room 208 is the only one of these options that fits these requirements.
|
A nurse is admitting a client who requires droplet precautions due to influenza
zusammenhängende Posts
Urheberrechte © © 2024 berikutyang Inc.
