A home network or home area network (HAN) is a type of computer network that facilitates communication among devices within the close vicinity of a home. Devices capable of participating in this network, for example, smart devices such as network printers and handheld mobile computers, often gain enhanced emergent capabilities through their ability to interact. These additional capabilities can be used to increase the quality of life inside the home in a variety of ways, such as automation of repetitive tasks, increased personal productivity, enhanced home security, and easier access to entertainment. Show
Origins[edit]Establishing this kind of network is often necessary for sharing residential Internet access to all networked devices.[citation needed] Based on techniques to mitigate IPv4 address exhaustion, most Internet service providers provide only a single wide area network-facing IP address for each residential customer. Therefore, such networks require network address translation in the network router. DHCP is used in a typical personal home local area network (LAN) to assign IP addresses within the home subnet. The DHCP server is a router[1] while the clients are hosts (e.g. personal computers, smart phones, printers, etc.). The router receives the configuration information through a modem from an internet service provider, which also operates DHCP servers with this router as one of the clients. The clients request configuration settings using the DHCP protocol such as an IP address, a default route and one or more DNS server addresses. Once the client implements these settings, the host is able to communicate on that internet. Infrastructure devices[edit]An example of a simple home network A home network usually relies on one or more of the following equipment to establish physical layer, data link layer, and network layer connectivity among internal devices, also known as the LAN, and external devices outside the LAN networks or the WAN. The following are examples of typical LAN devices:
Triple play[edit]A service provider's triple play solution features a rented modem/wireless router combination device, such as an Arris SURFboard SBG6580, that only requires the setting of a password to complete the installation and configuration. In most situations, there is no longer a need to acquire additional infrastructure devices or even for the user to possess advanced technical knowledge to successfully distribute internet access throughout the home. Physical connectivity and protocols[edit]Home networking standards
Home networks can use either wired or wireless technologies to connect endpoints. Wireless is the predominant option in homes due to the ease of installation, lack of unsightly cables, and network performance characteristics sufficient for residential activities. Wireless[edit]Wireless LAN[edit]One of the most common ways of creating a home network is by using wireless radio signal technology; the 802.11 network as certified by the IEEE. Most wireless-capable residential devices operate at a frequency of 2.4 GHz under 802.11b and 802.11g or 5 GHz under 802.11a. Some home networking devices operate in both radio-band signals and fall within the 802.11n or 802.11ac standards. Wi-Fi is a marketing and compliance certification for IEEE 802.11 technologies.[2] The Wi-Fi Alliance has tested compliant products, and certifies them for interoperability. Wireless PAN[edit]Low power, close range communication based on IEEE 802.15 standards has a strong presence in homes. Bluetooth continues to be the technology of choice for most wireless accessories such as keyboards, mice, headsets, and game controllers. These connections are often established in a transient, ad-hoc manner and are not thought of as permanent residents of a home network. Low-rate wireless PAN[edit]A "low-rate" version of the original WPAN protocol was used as the basis of ZigBee. Despite originally being conceived as a standard for low power machine-to-machine communication in industrial environments, the technology has been found to be well suited for integration into embedded "Smart Home" offerings that are expected to run on battery for extended periods of time. ZigBee utilizes mesh networking to overcome the distance limitations associated with traditional WPAN in order to establish a single network of addressable devices spread across the entire building. Z-Wave is an additional standard also built on 802.15.4, that was developed specifically with the needs of home automation device makers in mind. Twisted pair cables[edit]Most wired network infrastructures found in homes utilize Category 5 or Category 6 twisted pair cabling with RJ45 compatible terminations. This medium provides physical connectivity between the Ethernet interfaces present on a large number of residential IP-aware devices. Depending on the grade of cable and quality of installation, speeds of up to 10 Mbit/s, 100 Mbit/s, 1 Gbit/s, or 10Gbit/s are supported. Fiber optics[edit]Newer upscale neighborhoods can feature fiber optic cables running directly into the homes. This enables service providers to offer internet services with much higher bandwidth and/or lower latency characteristics associated with end-to-end optical signaling. Telephone wires[edit]
Coaxial cables[edit]The following standards allow devices to communicate over coaxial cables, which are frequently installed to support multiple television sets throughout homes.
Power lines[edit]The ITU-T G.hn and IEEE Powerline standard, which provide high-speed (up to 1 Gbit/s) local area networking over existing home wiring, are examples of home networking technology designed specifically for IPTV delivery.[3] Recently, the IEEE passed proposal P1901 which grounded a standard within the Market for wireline products produced and sold by companies that are part of the HomePlug Alliance.[4] The IEEE is continuously working to push for P1901 to be completely recognized worldwide as the sole standard for all future products that are produced for Home Networking.
Endpoint devices and services[edit]Traditionally, data-centric equipment such as computers and media players have been the primary tenants of a home network. However, due to the lowering cost of computing and the ubiquity of smartphone usage, many traditionally non-networked home equipment categories now include new variants capable of control or remote monitoring through an app on a smartphone. Newer startups and established home equipment manufacturers alike have begun to offer these products as part of a "Smart" or "Intelligent" or "Connected Home" portfolio. The control and/or monitoring interfaces for these products can be accessed through proprietary smartphone applications specific to that product line. General purpose[edit]
Entertainment[edit]
Some older entertainment devices may not feature the appropriate network interfaces required for home network connectivity. In some situations, USB dongles and PCI Network Interface Cards are available as accessories that enable this functionality. Lighting[edit]
Home security and access control[edit]
Environmental monitoring and conditioning[edit]
Cloud services[edit]The convenience, availability, and reliability of externally managed cloud computing resources continues to become an appealing choice for many home-dwellers without interest or experience in IT. For these individuals, the subscription fees and/or privacy risks associated with such services are often perceived as lower cost than having to configure and maintain similar facilities within a home network. In such situations, local services along with the devices maintaining them are replaced by those in an external data center and made accessible to the home-dweller's computing devices via a WAN connection. Network management[edit]Embedded devices[edit]Small standalone embedded home network devices typically require remote configuration from a PC on the same network. For example, broadband modems are often configured through a web browser running on a PC in the same network. These devices usually use a minimal Linux distribution with a lightweight HTTP server running in the background to allow the user to conveniently modify system variables from a GUI rendered in their browser. These pages use HTML forms extensively and make attempts to offer styled, visually appealing views that are also descriptive and easy to use. Apple ecosystem devices[edit]Apple devices aim to make networking as hidden and automatic as possible, utilizing a zero-configuration networking protocol called Bonjour embedded within their otherwise proprietary line of software and hardware products. Microsoft ecosystem devices[edit]Microsoft offers simple access control features built into their Windows operating system. Homegroup is a feature that allows shared disk access, shared printer access and shared scanner access among all computers and users (typically family members) in a home, in a similar fashion as in a small office workgroup, e.g., by means of distributed peer-to-peer networking (without a central server). Additionally, a home server may be added for increased functionality. The Windows HomeGroup feature was introduced with Microsoft Windows 7 in order to simplify file sharing in residences. All users (typically all family members), except guest accounts, may access any shared library on any computer that is connected to the home group. Passwords are not required from the family members during logon. Instead, secure file sharing is possible by means of a temporary password that is used when adding a computer to the HomeGroup.[6] Common issues and concerns[edit]Wireless signal loss[edit]The wireless signal strength of the standard residential wireless router may not be powerful enough to cover the entire house or may not be able to get through to all floors of multiple floor residences. In such situations, the installation of one or more wireless repeaters may be necessary. "Leaky" Wi-Fi[edit]Wi-Fi often extends beyond the boundaries of a home and can create coverage where it is least wanted, offering a channel through which non-residents could compromise a system and retrieve personal data. To prevent this it is usually sufficient to enforce the use of authentication, encryption, or VPN that requires a password for network connectivity.[7] However new Wi-Fi standards working at 60 GHz, such as 802.11ad, enable confidence that the LAN will not trespass physical barriers, as at such frequencies a simple wall would attenuate the signal considerably. Electrical grid noise[edit]For home networks relying on powerline communication technology, how to deal with electrical noise injected into the system from standard household appliances remains the largest challenge. Whenever any appliance is turned on or turned off it creates noise that could possibly disrupt data transfer through the wiring. IEEE products that are certified to be HomePlug 1.0 compliant have been engineered to no longer interfere with, or receive interference from other devices plugged into the same home's electrical grid.[8] Administration[edit]The administration of proliferating devices and software in home networks, and the growing amount of private data, is fast becoming an issue by itself. Keeping overview, applying without delay software updates and security patches, keeping juniors internet use within safe boundaries, structuring of storage and access levels for private files and other data, data backups, detection and cleaning of any infections, operating virtual private networks for easy access to resources in the home network when away, etc.. Such things are all issues that require attention and planned careful work in order to provide a secure, resilient, and stable home network easy to use for all members of the household and their guests. See also[edit]
References[edit]
External links[edit]
What type of network is used in homes?When it comes to home networks, there are two main types: Wired and wireless. This refers to how your devices accessing the internet connect to your LAN. For a wired network, this usually comes into your house from your cable line and then plugs into a modem and/or router.
Which type of network do we use in our homes while connecting a computer system and peripheral devices like a printer?A local-area network (LAN) connects the computer hardware in a localized area such as an office or home. Typically, LANs use wired connections to link the computers to each other and to a variety of peripheral devices such as printers.
Which network is used to connect computers?A router is a hardware device that allows you to connect several computers and other devices to a single Internet connection, which is known as a home network. Many routers are wireless, which allows you to create a home wireless network, commonly known as a Wi-Fi network.
What is LAN MAN and WAN network?LAN is an acronym for Local Area Network. MAN is an acronym for Metropolitan Area Network. WAN is an acronym for Wide Area Network. Definition and Meaning. LAN is a network that usually connects a small group of computers in a given geographical area.
|