Which are the following protocols are examples of TCP/IP transport layer protocols Show
Ethernet Which are the following protocols are examples of TCP/IP data link protocols Ethernet
The process of HTTP asking TCP to send some data and making sure that it is received correctly is an example of what? Same-layer interaction Adjacent-layer interaction The process of TCP on one computer marking a TCP segment as segment 1 , and receiving computer then acknowledge the receipt of TCP segment 1 is an example of what? Data encapsulation The process of a web server adding a TCP header to the contents of a web page, followed by adding an IP header and then adding a data link header and trailer, is an example of what? Data encapsulation Which of the following terms is used specifically to identify the entity created when encapsulating data inside data link layer headers and
trailers? Which OSI layer defines the functions of logical network-wide addressing and routing? Which OSI layer defines the standards for cabling and connectors Example of Application Layer Example of Transport Layer If you request for data from a webpage and you want to make a connection to it, when the server that you are calling for data to be sent says "ok" to sending the data, what response code does the PC get ? What is a feature of TCP which is different to UDP Same-Layer interaction on different computers The two computers use a protocol to communicate with the same layer on another computer. The protocol defined by each layer uses a header that is transmitted between the computers to communicate what each computer wants to do. Header information added by a layer of the sending computer is processed by the same layer of the receiving computer Adjacent-layer interaction on the same computer On a single computer, one layer provides a service to a higher layer. The software of hardware that implements the higher requests that the next lower layer perform the needed function In this article, we will talk about how applications deliver data between two devices using either Transmission Control Protocol (TCP) or User Datagram Protocol (UDP). By reading this article, you will understand the workings of TCP and UDP, how they differ from each other, and will also see various applications using these protocols. As a prerequisite, a foundational knowledge of TCP/IP Layer 1 and 2 would help any readers understand the article better. Table of contents
Introduction to transport layerThe transport layer is part of the TCP/IP networking model, sometimes called the networking architecture. It contains a comprehensive set of documents that describes everything required for a computer network to function. The transport layer is responsible for the logical communication between applications running on different hosts, thus providing services to application layer protocols on a higher layer of the TCP/IP network model. Even though many transport layer protocols exist, the two most commonly used protocols are the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP). These protocols provide different functionalities for different application requirements. A few of the most important functionalities are:
Tracking of individual conversationData flowing from one application to another is known as a conversation. A host can have multiple applications communicating with each other, either within a local network or a remote network. The transport layer has a mechanism that makes it possible for each application on a host, to communicate with another application on a different host, either within a local network or a remote network. According to Cisco, this mechanism assigns an identifier called a port number to each application, such that each software process that needs to access a particular network has an unique identifier. Ordered data transferA continuous stream of bytes is broken down into segments for transmission and delivery by the transport layer services. According to this article, most networks have a limitation on the amount of data that a single packet can contain. Because of this, the sending device transport layer prepares the data into segments. Similarly, the receiving device transport layer receives these segments and uses the header to reconstruct them into complete data. Multiplexing conversation using port numbersWhen using an application, the data or services provided usually appear as a stream of continuous data. But sending data (e.g., video) across a network as a complete stream can consume all of the available network bandwidth. This prevent other services such as an email from using the medium and makes error recovery and retransmission of damage data more difficult. The multiplexing mechanism segments TCP and UDP data into small chunks to enable communication from different users to interleave on the same network. This mechanism relies on a concept known as a socket. Transmission Control Protocol
The type of transport layer protocol an application chooses to use depends on the application requirement. TCP is analogous to sending a package with a tracker that tracks the package from its source to its destination.  Source: TCP Header by Wikiversity As defined in Request For Comment (RFC) 7913, TCP has the following features:
Connection establishment and terminationBefore any TCP feature can occur, TCP connection establishment must take place first, because TCP is a connection-oriented protocol. A connection-oriented protocol is a protocol that establishes a permanent connection between client and server before the transfer of data can begin. During this connection establishment, a device negotiates the amount of traffic to be forwarded during the three-way handshake, which must be completed before data transfer can begin. A three-way handshake is established using two flags:
The SYN flag is used in the first step of the connection establishment between the two hosts. This flag is found only in the first packet from the server and the host containing a synchronizing sequence number. The ACK flag is used to acknowledge packets that are successfully received by a device. For example, to create a three-way handshake between a server and a host, the host sends a SYN flag to a server providing all the necessary information such as its port number (source port) and destination port number (signifying which services it wants access to). When the server receives the SYN flag from the host, it sends back another SYN and an ACK flag. This contains a source port number (the port number used as the destination port number on the SYN flag sent by the host) and a destination port number (the port number that the host used as source port number). The host acknowledges those flags’ reception with an ACK flag, and a connection is established, thus forming a three-way handshake. Three-way handshakeNow, let’s have a look at how three-way handshake is performed in detail:
Session Termination In the example above, the host initiates the session termination. But in practice, any device can terminate a session. Error recoveryTCP provides reliable data transfer, that means that all packet sent from a source reaches its destination without any failure. In a situation where an error occurs along the route, TCP uses a mechanism to resend the faulty segment. It uses acknowledgment (ACK) and sequence fields in the TCP header, to number the data bytes and track them. By so doing, it achieves reliability. For example, if a web server has 400 bytes of data to send to a requesting web client. On establishing the session, the server breaks down the data into smaller segments, let’s say, 100 bytes each. Then, the server sends the first 100 bytes (0-99) of the data, with a sequence number of 1. The host after receiving this first segment, sends an ACK informing the server that the packet has reached its destination and starts waiting for the arrival of the next segment i.e., 100-199 with a sequence number of 2. This mechanism continues up to 400 bytes, with the host sending an acknowledgment for each segment received. The explanation above does not recover any error, it will be the same TCP mechanism used for error recovery. For error recovery, TCP uses the sequence and ACK flag so that the receiving host can notice missing data and request the sending device to resend the segment and uses the ACK flag to acknowledge the received of the missing piece. Assuming in the example above, the host received the first hundred bytes (0-99) with a sequence number of 1, and instead of receiving the next bytes (100-199) with a sequence number of 2, the host receives a segment with (200-299) bytes with a sequence number of 3, it will send a packet requesting for that missing segment, i.e., 100-99 with a sequence number of 2. The sending device can also resend a segment if the receiving device does not acknowledge all the data sent. The sending device, in this case, is a server. The server waits for a few moments using a timer called the retransmission timer, to make sure that no other acknowledgment arrives, after that it then decides to resend that particular segment that it did not receive its acknowledgment flag. Flow control using windowingBecause network host has limited resources such as limited space and processing power, TCP implements a mechanism called flow control using a window concept. This is applied to the amount of data that can be awaiting acknowledgment at any one point of time. The receiving device uses the windowing concept to inform the sender how much data it can receive at any given time. This allows the sender to either speed up or slow down the sending of segments through a window sliding process. User Datagram ProtocolUser datagram protocol (UDP) is considered as a best-effort transport protocol because it is a light-weighted transport protocol. UDP is a connectionless protocol, meaning it provides no reliability or reordering of the data segment and flow control like TCP. Because of this, UDP is faster than TCP in transporting data. However, according to Cisco, UDP provides some similar benefits to TCP, such as data segmentation and multiplexing using port numbers. UDP is used by applications that are tolerant to loss of data but not delay. For example, TCP’s requirement will make it difficult to stream live video, as all packets must be sent and acknowledged, which will consume many resources and can cause severe delay. But with UDP, if a packet is missing, the streaming will continue unnoticed. It only becomes apparent when many segments are missing, which is seen in low video quality and lack of synchronization between video and audio. The significant difference between TCP and UDP is that TCP offers a wide range of services to applications, while UDP does not, this does not make UDP inferior to TCP, but by providing fewer services, UDP has fewer bytes in its header, and this makes UDP is faster when transporting data. Source: UDP Header by Wikiversity Differences between UDP and TCP
ApplicationProtocols supported by UDP are:
Protocols supported by TCP are:
Multiple separate conversationsThe whole purpose of building an enterprise network or connecting a small office home office (SOHO) network to the internet, is for applications such as text messaging, email, video streaming, video, and audio conversations to occur. To manage these multiple simultaneous conversations, TCP and UDP uses a header field that can uniquely identifies these applications running simultaneously. This unique identifier is called port number. Port numberEach service running on a device uses a specific well-known port number. These port numbers identify each application or service running on a client uniquely. For every connection from clients, the segment header contains two types of port numbers:
Source port numberSource port numbers are port numbers dynamically generated by the sending device transport layer, that identifies each conversation between the two end devices. Destination port numberIn a segment sent by a client, a destination port number is placed within it to tell the destination server, the services that the client is requesting. This mechanism is possible because, unlike on a client machine in which request can originate from any locally unused port, services provided by a server have a well-known dedicated port assigned to them. As such, the destination port number is inserted by the client, informs the server. For example, Telnet uses TCP transport protocol and has a destination port number of 23. When a server receives a segment with a destination port number of 23, it knows that the client is requesting a Telnet service. Socket pairThe source and the destination port numbers placed within a segment, only identifies which application in a client, requests for that service from a server. But the segment does not have any mechanism to specify which device is requesting the service. To identify which device is requesting a particular service, the internet protocol (IP) encapsulates the segment containing the source and the destination port number. This IP packet includes the source IP address to identify which device the request originates from and the destination IP address to determine the destination device. Thus, creating a socket. A socket is a combination of the destination IP address and destination port or source IP address and source port. A socket is handy to the transport layer because it keeps track of services and devices requesting such services, to properly forward the data to the requesting application as stated by Cisco. Port number groupsInternet Assigned Numbers Authority (IANA), an organization responsible for assigning various addressing standards, has grouped port numbers into three major groups, these groups are:
Well-known ports (0-1023)Well-known ports are port numbers assigned to services such as web browsers, email clients, HTTPS, and Telnet. The RFC6335 outlines the registration procedures for these services and port numbers. The table below shows us some well-known port numbers, the transport layer protocol that they support, and their applications. These port numbers are assigned as listed in RFC6335.
Source: IANA Registered port numbers (102-49151)Organizations such as Cisco have port numbers assigned to some of their well-known services by IANA. IANA assigned these port numbers to request entities to use with specific processes or applications. Dynamic (49152-65535)Dynamic port numbers are usually assigned by a client operating system (OS) dynamically when establishing a server connection. ConclusionThe transport layer protocol plays a vital role in how applications exchange data between eachother. One of these two transport layer protocols, Transport layer protocol (TCP) and User data protocol (UDP), can be used by an application to exchange data. Applications that are fault-tolerant but cannot tolerate delay use UDP, while those that can delay but not fault use TCP. To summarize:
Further reading
Peer Review Contributions by: Srishilesh P S Which of the following protocols are TCP IP transport layer protocols?Transport layer protocols at this level are Transmission Control Protocol (TCP), User Datagram Protocol (UDP), and Stream Control Transmission Protocol (SCTP). TCP and SCTP provide reliable, end-to-end service.
Which of the following are examples of TCP IP application layer protocols?Application Layer. Standard TCP/IP services such as the ftp , tftp , and telnet commands.. UNIX "r" commands, such as rlogin and rsh.. Name services, such as NIS+ and Domain Name System (DNS). File services, such as the NFS service.. Simple Network Management Protocol (SNMP), which enables network management.. Which of the following is an example of transport layer protocol?The Transmission Control Protocol (TCP) is a transport layer protocol, and the Internet Protocol (IP) is a network layer protocol.
Which of the following protocols are examples of TCP IP transport layer protocols choose 2 answers?The two most important protocols in the Transport Layer are Transmission Control Protocol (TCP) and User Datagram Protocol (UDP).
|
Which of the following protocols are examples of TCP/IP transport layer protocols
zusammenhängende Posts
Urheberrechte © © 2024 berikutyang Inc.
